Version Bootloader 40MHz 57600 bauds et Appli MicroC 40MHz 57600 bauds

19:20:22.984> Attention : Tinybootloader V1.98  limite EEPROM à 256 bytes ! not 1024
19:20:23.671>   Lecture 16 bytes PIC EEPROM  :  BOOTLOADER 2016
19:20:23.671> Vecteur Start Bootloader en 0x17F38=  63EF2EF0
19:20:23.671> Adresse point d'entree Prg MikroC = 2e63 h mutiplie 2 soit 5CC6  ou  23750 decimal
19:20:23.671> Mikroc Pro 6.62
19:20:23.671> Nokia_LCD_18F4685
19:20:23.671> With Bootloader.
19:20:23.671> Platine PIC18F Nokia 21-03-2016
19:20:23.734> Freq kHz=       40000
19:20:25.234> Mikroc Pro 6.62
19:20:25.234> Platine 18F4685
19:20:25.296> With Bootloader.
19:20:25.296> RTC DS1307 I2C
19:20:25.296> Paulfjujo@freefr
19:20:30.296>
19:20:30.359>  ATTENTION : SOFTWARE I2C Init :   SCL =RB6   SDA=RB7
19:20:31.359>
19:20:31.359>  re-Lecture DS1307
19:20:31.359>   Read RTC TIME
19:20:33.796>  Time:  19:  4: 44;Diman 20/  3/ 16;
19:20:33.796> Keyb Cdes :
19:20:33.859> - STArt sauve -> 24LC256
19:20:33.859> - HALt  sauve x 24LC256
19:20:33.859> - RELit <-  from 24LC256
19:20:33.859> - DUMp all Flash area
19:20:33.859>
19:20:33.859> Init Interrupts UART
19:20:33.859>   Index 24LC512=    38
19:20:36.359> Time:  19:  4: 46; ADC0=   391; ADC1=   580
19:20:39.609> Time:  19:  4: 50; ADC0=   392; ADC1=   581
19:20:42.796> Time:  19:  4: 53; ADC0=   392; ADC1=   580